The Copper Tip Energy Services Canadian Head Office in Nisku, near Edmonton, runs every service line: coiled tubing, nitrogen pumping, nitrogen storage, fluid pumping and hydrotesting, acidizing and chemical, acid shower trailers, vapour phase cleaning, and acid and nitrogen transport, with 24-hour dispatch.
Copper Tip runs coiled tubing (coil tubing, CT) for wellbore cleanouts, plug drillouts, nitrogen lift and well unloading, acid stimulation, coil-conveyed perforating, and horizontal well interventions. The units log weight, pressure, temperature and injection rate in real time, and because the coil runs through the wellhead under pressure, a live well does not need to be killed first.
Sand, scale and debris cleanouts, vertical and horizontal
Flameless and direct-fired nitrogen (N₂) pumping units handle pipeline purging, nitrogen pressure testing and leak testing, well lift and unloading, vessel purging and inerting, and plant turnaround support, including hot nitrogen for reactor cooldowns. Flameless units cover enclosed facilities and compressor stations where open flame is restricted; direct-fired units cover high-volume pipeline and wellbore work.
Pipeline purging and product displacement
Purge and pack, purge and blanket
Pneumatic pressure testing and leak detection
Nitrogen kick-around, well lift and unloading
Vessel purging, inerting and blanketing
Line drying
Foam cement and nitrified frac and stimulation support
Liquid nitrogen (LN₂) storage trailers and gaseous nitrogen tube trailers are spotted on location beside the pumping unit, so extended cleanouts, large displacements and long pipeline jobs keep drawing nitrogen past what a pumper carries on board. The high-pressure nine-tube trailer is also available for rental where a job needs a small, steady supply.
High-pressure fluid pumping covers pipeline hydrostatic testing (hydrotests), pipeline flooding, filling and dewatering, facility pre-commissioning and commissioning, kill fluid and cement displacement, and acid and chemical injection. Pump rate, pressure and volume are monitored in real time, on equipment built for HCl, brine and produced water.
Wellbore acidizing and acid jobs: hydrochloric acid (HCl) matrix treatments and acid washes, bullhead and coil-spotted acid, disposal well stimulation, acid hauling, and batch chemical pipeline treatments with corrosion inhibitor, scale inhibitor or biocide. Acid supply, transport, pumping, nitrogen and coiled tubing come under one call, with treatment charts and CSV data on site.
Every Copper Tip acid job has an emergency safety shower and eye wash unit staged on location beside the acid supply and pumping equipment. The units come as pickup-towable tandem safety shower trailers, which meet ANSI/ISEA Z358.1-2014, and truck-mounted units with four shower and eye wash stations.
Vapour phase (vapor phase) chemical cleaning and decontamination for plant turnarounds: cleaning chemical carried by a steam or gas stream through vessels, heat exchangers, amine and glycol systems, process piping, headers and dead legs, dissolving hydrocarbon fouling, scale and iron sulphide with less confined space entry and no large fluid volumes.
Acid hauling, chemical transport and bulk liquid nitrogen delivery by drivers certified for Transport Canada TDG and US DOT Hazmat, on corrosion-resistant acid trailers and nitrogen bulkers with onboard boost pumps. Loads are coordinated with the pumping crews on site, including cross-border Canada–US dangerous goods routes.
What services does Copper Tip provide in Nisku, near Edmonton?
Every Copper Tip service line runs from the Nisku location at 504 15 Avenue: coiled tubing, nitrogen pumping, nitrogen storage, fluid pumping and hydrotesting, acidizing and chemical, acid shower trailers, vapour phase cleaning, and acid and nitrogen transport. It serves Cardium / Pembina, Duvernay, Viking, and Mannville. 24-hour dispatch: 1-855-463-1414.
Service You Can Count On
Call 1-855-463-1414 any time, day or night, or request a quote online.
